I need a knife gate valve for at in

Bamberg, South CarolinaEngineered and supported in the US
Stock on the shelfCommon sizes ready to ship
Engineered to orderBeyond the standard patterns
ISO 9001:2015PED, Machinery and ATEX directives

Applications

Where Arnett valves and penstocks work, from mining and minerals through to water treatment and power generation.

Mining & minerals Knife gate valves and penstocks in mining and minerals processing

The series

Six series cover the full range. Choose by the media you handle, the pressure you run, or the problem you are solving.

Knife gate valves

Purging push-through

FLUX series 4 models
Max pressure
725PSI
50 bar
Face-to-face
2.1"–21.1"
54 to 537 mm
Max temperature
435°F
224°C
Sizes
2"–48"
from DN50to DN1200
Models
FLUX SStandard patternShort face-to-face150 psi10 bar
FLUX LLong patternLong-pattern spools150 psi10 bar
FLUX HHigh pressureFull size range435 psi30 bar
FLUX XExtreme pressureTo 24 inch725 psi50 bar
Key features
Purging push-throughTwo sleeves meet in the bore, flow never reaches the body
Replaceable wetted setThe whole wetted path is a service item
Moulded wiping sealClears the gate on every cycle
Bidirectional drop-tightSeals with pressure on either face
Specify the FLUX An Arnett engineer sizes it and quotes it.
[email protected] Call 844-785-7585
FLUX Series Brochure
DOWNLOAD
Knife gate valves

Fully lined

HALO series 2 models
Max pressure
290PSI
20 bar
Face-to-face
1.9"–5.5"
48 to 140 mm
Max temperature
435°F
224°C
Sizes
2"–24"
from DN50to DN600
Models
HALO SLined knife gateThe standard lined valve, 2" to 24"145 psi10 bar
HALO LHigh pressure linedTwice the pressure, 2" to 16"290 psi20 bar
Key features
One-piece polyurethane linerCovers the full wetted path
Self-gasketing flange sealThe liner doubles as the gasket
Self-flushing full portThe sleeve groove clears itself
Zero-leak shut-offBidirectional, leakage class VI
Specify the HALO An Arnett engineer sizes it and quotes it.
[email protected] Call 844-785-7585
HALO Series Brochure
DOWNLOAD
Knife gate valves

Guided shear

APEX series 3 models
Max pressure
725PSI
50 bar
Face-to-face
2.0"–4.5"
51 to 114 mm
Max temperature
400°F
204°C
Sizes
2"–24"
from DN50to DN600
Models
APEX SGuided shearGeneral guided shear duty145 psi10 bar
APEX HHigh pressureSame lay length363 psi25 bar
APEX XExtreme pressureANSI Class 300 and above725 psi50 bar
Key features
Guided shear gateA machined tip cuts solids on the way closed
One lay lengthIdentical face-to-face across three classes
PTFE scraperKeeps the sealing faces clean every cycle
No deratingEach model holds its rating to 24 inch
Specify the APEX An Arnett engineer sizes it and quotes it.
[email protected] Call 844-785-7585
APEX Series Brochure
DOWNLOAD
Knife gate valves

Replaceable seat

CORE series 2 models
Max pressure
1450PSI
100 bar
Face-to-face
1.7"–6.1"
43 to 154 mm
Max temperature
392°F
200°C
Sizes
2"–24"
from DN50to DN600
Models
CORE SUnidirectionalThe published range, 2" to 24"The published range, DN50 to DN600232 psi16 bar
CORE WExtreme pressureEngineered to order1450 psi100 bar
Key features
Field-replaceable seatThe site crew changes it with the valve in the line
Metal seat plus soft seatMetal holds geometry, sleeve holds the seal
Maintenance-free top sealOne moulded seal replaces the packing gland
Thickest knife on the marketBuilt for repeated heavy cycling
Specify the CORE An Arnett engineer sizes it and quotes it.
[email protected] Call 844-785-7585
CORE Series Brochure
DOWNLOAD
Knife gate valves

Bidirectional full bore

OMNI series 1 model
Max pressure
145PSI
10 bar
Face-to-face
1.7"–6.1"
43 to 154 mm
Max temperature
392°F
200°C
Sizes
2"–24"
from DN50to DN600
Models
OMNI SBidirectionalOne model covers the series145 psi10 bar
Key features
Zero-pocket cavityNothing settles below the gate
O-ring profile side sealSeals with pressure on either face
Maintenance-free top sealThe packing line drops off the routine
One valve, many typesReplaces six or seven conventional types
Specify the OMNI An Arnett engineer sizes it and quotes it.
[email protected] Call 844-785-7585
OMNI Series Brochure
DOWNLOAD
Penstocks

Water penstocks

FX series 1 model
Working head
32.8ft
10 m
Installation
3 types
3 types
Channel, wall or embedded
Max temperature
176°F
80°C
Sizes
118.1"
3000mm
Up to 118.1" x 118.1"Up to 3000 x 3000 mm
Models
FXWall mounted penstockWelded assembly, built to the opening32.8 ft head10 m head
Key features
One-piece seal profileCurves through the upper corners, so no joint sits in the sealing path
Bidirectional as standardSeals with the head arriving on either face
Three installation typesChannel anchored, cast into the concrete, or bolted to the wall
Rising or non-rising spindleSpindle extensions for remote operation, floor stands to the works
Specify the FX An Arnett engineer sizes it and quotes it.
[email protected] Call 844-785-7585
FX Series Brochure
DOWNLOAD

Contact Arnett

Call, send an email or fill in the form. An Arnett engineer replies with a quote and a recommended model.